Kontaktieren Sie uns

FLAT ENDE MILL

Die flache Endmühle ist die Endmühle mit flachem/quadratischem Ende.Es ist ein allgemeiner Endtyp für das Rohfräsen, wirtschaftlicher im Vergleich zu der Kugelfräse und der Eckradius-Endmühle, aber es ist nicht geeignet für die Bearbeitung in der Geschwindigkeit so hoch wie andere Zwei-Typ-Endmühlen, weil zu hohe Rotation und Vorschub zu einem Bruch der scharfen Eckblatt führen kann.


Es gibt vier Hartmetallsorten, die auf allgemeine Flachendmühlen angewendet werden:

BT45, für Fräsmaterialien, deren Härte von HRC45Grad bis HRC48Grad, Werkstückkategorien P, K und weicher Edelstahl unter M-Gruppe in ISO-Klassifikation reicht.

BT50, für HRC50 bis HRC53degree, hauptsächlich für M-, N- und K-Werkstücke.

BT55, für HRC55 bis HRC58Grad, für S, M und K Werkstück.

BT60, für HRC 60 bis 65Grad, für Fräs-Abschreckmaterialien (HRC65 ungefähr), Hartholz und Finish-Fräsen von SUS 316L Edelstahl, das meiste Werkstück unter ISO-Kategorie H. 


Flat End Mill.jpg

Flache Endmühle Liste
D Schneiden Dia.(mm) D Shank Dia.(mm) Lc Schneidlänge (mm) L Gesamtlänge (mm)
2 Strömungsflasche Endmühle 2 4 6 50
3 Fließband-Endmühle 2 4 6 50
4 Fließband-Endmühle 1 4 3 50
6 Flute Flach-Endmühle 6 6 25 75
2 Flute, 0,2 mm Flachkarbide Endmühle, Kleindurchmesser-Fräsmaschine 0.2mm 4mm 0.4mm 50mm
2 Flute, 0,3 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.3mm 4mm 0.6mm 50mm
2 Flute, 0,4Mm Flachkarbid End Mill, Small Diameter Mill Cutter 0.4mm 4mm 0.8mm 50mm
2 Flute, 0,5Mm Flachkarbid End Mill, Small Diameter Mill Cutter 0.5mm 4mm 1.0mm 50mm
2 Flute, 0,6Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.6mm 4mm 1.0mm 50mm
2 Flute, 0,7Mm Flachkarbid End Mill, Small Diameter Mill Cutter 0.7mm 4mm 1.4mm 50mm
2 Flute, 0,8Mm Flachkarbid End Mill, Small Diameter Mill Cutter 0.8mm 4mm 1.6mm 50mm
2 Flute, 0,9Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.9mm 4mm 1.8mm 50mm
2 Flute, 1 Mm Flat Carbide End Mill, Small Diameter Mill Cutter 1mm 4mm 3mm 50mm
2 Flute, 1.1 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.1mm 4mm 3mm 50mm
2 Flute, 1.2 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.2mm 4mm 3mm 50mm
2 Flute, 1.3 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.3mm 4mm 3mm 50mm
2 Flute, 1.4 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.4mm 4mm 3mm 50mm
2 Flute, 1.5 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.5mm 4mm 4mm 50mm
2 Flute, 1.6 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.6mm 4mm 4mm 50mm
2 Flute, 1.7 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.7mm 4mm 4mm 50mm
2 Flute, 1.8 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.8mm 4mm 5mm 50mm
2 Flute, 1.9 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.9mm 4mm 5mm 50mm
2 Flute, 2 Mm Flat Carbide End Mill, Small Diameter Mill Cutter 2mm 4mm 6mm 50mm
2 Flute, 2.5 Mm Flachkarbid End Mill, Small Diameter Mill Cutter 2mm 4mm 6mm 50mm
2 Flute, 3 Mm Flachkarbide Endmühle, Kleindurchmesser-Fräsmaschine 3mm 4mm 10mm 50mm
2 Flute, 4 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 3mm 4mm 10mm 50mm
2 Flute, 6mm Flachkarbide Endmühle, Mill Cutter 6mm 6mm 15mm 50mm
2 Flute, 8mm Flachkarbide Endmühle, Mill Cutter 8mm 8mm 20mm 60mm
2 Flute, 10mm Flachkarbide Endmühle, Mill Cutter 10mm 10mm 25mm 75mm
2 Flute, 12mm Flachkarbide Endmühle, Mill Cutter 12mm 12mm 30mm 75mm
2 Flute, 14mm Flachkarbide Endmühle, Mill Cutter 14mm 14mm 42mm 100mm
2 Flute, 16mm Flachkarbide Endmühle, Mill Cutter 16mm 16mm 48mm 100mm
2 Flute, 18mm Flachkarbide Endmühle, Mill Cutter 18mm 18mm 48mm 100mm
2 Flute, 20mm Flachkarbide Endmühle, Mill Cutter 20mm 20mm 48mm 100mm
3 Flute, 2mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 2mm 4mm 6mm 50mm
3 Flute, 3mm Flat Carbide End Mill, Mill Cutter für Aluminium 3mm 4mm 9mm 50mm
3 Flute, 4mm Flat Carbide End Mill, Mill Cutter für Aluminium 4mm 4mm 12mm 50mm
3 Flute, 5mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 5mm 6mm 13mm 50mm
3 Flute, 6mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 6mm 6mm 18mm 50mm
3 Flute, 8mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 8mm 8mm 24mm 60mm
3 Flute, 10mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 10mm 10mm 30mm 75mm
3 Flute, 12mm Flat Carbide End Mill, Mill Cutter für Aluminium 12mm 12mm 36mm 75mm
3 Flute, 14mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 14mm 14mm 40mm 100mm
3 Flute, 16mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 16mm 16mm 48mm 100mm
3 Flute, 18mm Flat Carbide End Mill, Mill Cutter for Aluminium 18mm 18mm 48mm 100mm
3 Flute, 20mm Flachkarbide Endmühle, Mühlenschneider für Aluminium 20mm 20mm 48mm 100mm
4 Flute, 1 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 1mm 4mm 3mm 50mm
4 Flute, 2 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 2mm 4mm 6mm 50mm
4 Flute, 3 Mm Flat Carbide End Mill, Small Diameter Mill Cutter 3mm 4mm 10mm 50mm
4 Flute, 4 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 3mm 4mm 10mm 50mm
4 Flute, 6mm Flachkarbide Endmühle, Mill Cutter 6mm 6mm 15mm 50mm
4 Flute, 8mm Flachkarbide Endmühle, Mill Cutter 8mm 8mm 20mm 60mm
4 Flute, 10mm Flachkarbide Endmühle, Mühle Cutter 10mm 10mm 25mm 75mm
4 Flute, 12mm Flachkarbide Endmühle, Mill Cutter 12mm 12mm 30mm 75mm
4 Flute, 14mm Flachkarbide Endmühle, Mill Cutter 14mm 14mm 42mm 100mm
4 Flute, 16mm Flachkarbide Endmühle, Mill Cutter 16mm 16mm 48mm 100mm
4 Flute, 18mm Flachkarbide Endmühle, Mill Cutter 18mm 18mm 48mm 100mm
4 Flute, 20mm Flachkarbide Endmühle, Mill Cutter 20mm 20mm 48mm 100mm
6 Flute, 6mm Flachkarbide Endmühle, Mill Cutter 6mm 6mm 25mm 75mm
6 Flute, 8mm Flachkarbide Endmühle, Mill Cutter 8mm 8mm 35mm 100mm
6 Flute, 10mm Flachkarbide Endmühle, Mill Cutter 10mm 10mm 45mm 100mm
6 Flute, 12mm Flat Carbide End Mill, Mill Cutter 12mm 12mm 50mm 150mm
6 Flute, 16mm Flachkarbide Endmühle, Mill Cutter 16mm 16mm 65mm 150mm
6 Flute, 20mm Flachkarbide Endmühle, Mill Cutter 20mm 20mm 65mm 150mm
4 Flute, 0.2 Mm Flachkarbid End Mill, Small Diameter Mill Cutter for Stainless Steel 0.2mm 4mm 0.4mm 50mm
4 Flute, 0.3 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.3mm 4mm 0.6mm 50mm
4 Flute, 0.4 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.4mm 4mm 0.8mm 50mm
4 Flute, 0,5 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.5mm 4mm 1.0mm 50mm
4 Flute, 0,6 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.6mm 4mm 1.2mm 50mm
4 Flute, 0,7 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.7mm 4mm 1.4mm 50mm
4 Flute, 0,8 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.8mm 4mm 1.6mm 50mm
4 Flute, 0.9 Mm Flachkarbide End Mill, Small Diameter Mill Cutter 0.9mm 4mm 1.8mm 50mm
4 Flute, 1Mflache Carbide End Mill, Small Diameter Mill Cutter 1mm 4mm 3mm 50mm
4 Flute, 1.5Mm Flachkarbid End Mill, Small Diameter Mill Cutter 1.5mm 4mm 4mm 50mm
4 Flute, 2MFlat Carbide End Mill, Small Diameter Mill Cutter 2mm 4mm 6mm 50mm
4 Flute, 2.5Mm Flachkarbid End Mill, Small Diameter Mill Cutter 2.5mm 4mm 7mm 50mm
4 Flute, 3Mflache Carbide End Mill, Small Diameter Mill Cutter 3mm 4mm 8mm 50mm
4 Flute, 4Mmm Flachkarbide Endmühle, Kleindurchmesser-Fräsmaschine 3mm 4mm 11mm 50mm
4 Flute, 5Mflache Carbide End Mill, Small Diameter Mill Cutter 5mm 6mm 13mm 50mm
4 Flute, 6MFlat Carbide End Mill, Small Diameter Mill Cutter 6mm 6mm 15mm 50mm
4 Flute, 8Mmm Flachkarbide Endmühle, Kleindurchmesser-Fräsmaschine 8mm 8mm 20mm 60mm
4 Flute, 10Mmm Flachkarbide Endmühle, Kleindurchmesser-Fräsmaschine 10mm 10mm 25mm 75mm
4 Flute, 12Mflache Carbide End Mill, Small Diameter Mill Cutter 12mm 12mm 30mm 75mm
4 Flute, 16Mflache Carbide End Mill, Small Diameter Mill Cutter 16mm 16mm 40mm 100mm
4 Flute, 20Mm Flachkarbide Endmühle, Kleindurchmesser-Fräsmaschine 20mm 20mm 45mm 100mm
Vielen Dank für Ihre Aufmerksamkeit Betätig!
Our sales will get in touch with you.
86-18059874023
79 Xinggang Wuli, Xiamen Area,China (Fujian) Pilot Free Trade Zone 361024 Xiamen Betalent Carbide Co.,Ltd
Sitemap Privacy Policy Powered by: yinqingli.com
79 Xinggang Wuli, Xiamen Area,China (Fujian) Pilot Free Trade Zone 361024 Xiamen Betalent Carbide Co.,Ltd
silinzhang@betalentcarbide.com
86-18059874023